はつねの日記

Kinect, Windows 10 UWP, Windows Azure, IoT, 電子工作

多数のEV3があるときにBluetoothで自機を特定する方法

ハッカソン会場でEV3がたくさんあるような場合、Bluetoothで接続しようとすると次のように「EV3」という名前のデバイスがたくさん表示されます。

In such cases there is a lot of EV3 in Hakkason, a device named "EV3" appears a lot like the following is an attempt to connect by Bluetooth.

image

 

このような事態になったら「EV3」というデバイス名を変更するのがよいでしょう。

デバイス名の変更は、PCとEV3をUSBで接続してからEV3ソフトウェアを起動して、インテリジェントブロックの情報にある「EV3」を変更して行います。

It would be better to change the device name "EV3" When you become a situation like this.

Changing the device name, is done by starting the EV3 software after connecting via USB EV3 and the PC, and change in the information of intelligent block "EV3".

image

 

image

名前を更新したら「↓」でEV3にダウンロードすればデバイス名が変わります。

Device name will change if you download the EV3 in the "↓" After updating the name.

image

 

このようにデバイス名を「EV3-HATSUNE」と変更したときには、Windowsストアアプリからのデバイス名指定も「EV3」ではなく「EV3-HATSUNE」になります。

Lego.EV3の最新版はデバイス名が「EV3」固定になっていますが、すでに変更したソースをpull requestしているのできっと対応されると思います。

When you change the "EV3-HATSUNE" the device name in this way, it will be "EV3-HATSUNE" instead of "EV3" is also specified device name from the Windows Store app.

I think that device name is set to the "EV3" fixed to the latest version of Lego.EV3, but we are surely support it because I pull request on which source you have already changed.